ABIT AA8 DuraMAX Review @ Bjorn3D

"To check the FSB overclocking capabilities of the board, I set the processor's multiplier to 14 (default is 18) and began slowly raising the FSB from 200 in increments of 10 until the system would no longer POST. Keep in mind that I'm doing this with the retail HSF included with the 560 processor, so my cooling is far from optimal for overclocking."
Also keep in mind that the reviewer is using an engineering sample processor that comes unlocked from the factory. These are not readily available so even though they are posting a really good FSB increase they removed the processor limitation from the equation. Prolly not the best way to review a mobo but does explore some of the chipset limitations.

Related Web URL: http://www.bjorn3d.com/read.php?cID=692