CoolerMaster xDream Special Edition Review

The CoolerMaster xDream SE is designed for socket processors including Pentium 3 and the entire AMD Athlon line up to 3200+ and higher. Here is an overview of the system and testing methodology.

Epox EP-8RDA+
Athlon XP2200+ Tbred (AXDA2200DKV3C)
CoolerMaster xDream SE
CoolerMaster xDream

I used the Epox BIOS monitoring software to provide me with temperature information from the system. A simple game of Quake 3 provided my 100% processor usage.

Editors note: Even though the Windows XP task manager reported 100% processor usage we could never attain a 100% of the rated heat output as documented by AMD (see below) when using Quake3 as a basis for that heat production. Knowing this the game was played until the maximum temperature was attainted and stabilized, or when the round was over.

Other things to consider when judging software induced heat output.
a) Clock throttling by the processor at high temperatures.
b) Normal software isn't designed to produce maximum heat output.
c) Variances of cooling temperature.
d) Variances in CPU load.
e) Inaccuracies in thermal diode readouts.
Of course the list goes on..

My testing methodology is aimed to provide a real world look into this heatsink given the test system provided.

A C/W rating can quickly be calculated using this formula.

C/W = (CPU temp - Ambient temp)/(Variance(%) * CPU Watts)
Allowed variance for this test = 75%
CPU Watts = 67.9W

0.24 C/W = (35C - 23C)/(.75(67.9W))

For this next test we cranked the FSB up to 150Mhz and re-ran the tests. To calculate how the C/W rating has changed we will need to factor in the increased processor wattage. The formula and constants for this is listed below.

ocC/W = dCPU Watts * (ocMhz / dMhz) * (ocVcore / dVcore)²
ocMhz = 2025
dMhz = 1800
ocVcore = 1.65
dVcore = 1.65
The variance still applies for our C/W calcuation
Allowed variance for this test = 75%
CPU Watts = 76.4W

0.21 C/W = (35C - 23C)/(.75(76.4W))

You will notice the change in the C/W rating; this gives us an idea as to how well this heatsink is able to dissipate a given load. The lower this number is the better the heatsink is at cooling. We can also get an idea as to the heatsinks capacity by looking at the change in C/W in relation to CPU speed.

Keep in mind this calculation is provided for demonstration purposes only and may not reflect the actual lab tested C/W rating, but I think I'm close